Painting a Stone Pillar

Tips from Real-Estate-Agents.com

Q: Can you advise a paint for a stone pillar at the entrance to our drive? The previous paint has flaked off.

A: The situation described was probably caused by either of the following:

1) An oil based paint was applied, which will deteriorate, becoming flaky and brittle.

2) An acrylic based paint was applied to a contaminated (either oily or greasy) surface.

The correct application would be an acrylic based paint applied to a clean rock/mortar surface. To attain a clean surface, I recommend water blasting to remove completely all existing paint, acid etching (using a muratic acid or comparable), then applying the Acrylic based paint.

To locate a reputable specialist to water blast/power wash, acid wash and/or paint your pillar, please return to our site: http://www.servicemagic.com, and let us match you with the ideal service professional in your area.

Good luck!

This information is brought to you by Craig Eastman, President of Eastco Enterprises, Inc. in San Antonio, TX.

-- Tips courtesy of Service Magic