Air Conditioner Maintenance
Tips from Real-Estate-Agents.com
reprinted courtesy of ServiceMagic.com
Q: How can I clean and do routine
maintenance on my air conditioning unit?
A: Heating and air conditioning companies often offer
maintenance servicing for both air conditioning units and furnaces.
"We recommend annual air conditioning check-ups in the
spring and furnace check-ups every fall. Although regular checkups
will not absolutely guarantee that a unit will continue to work
perfectly throughout the season, they will reveal most small problems
that can lead to major, far more expensive problems if left unattended."
Homeowners can do the following things to maintain their air
conditioning units:
- The first thing to check before turning on your unit is to
make sure the condensing unit located outside is not covered
up. The unit needs to draw air into the system in order to have
something to cool and circulate inside, but the process is hindered
if it cannot pull in enough outside air. (We're amazed how many
homeowners call because their air conditioner isn't cooling,
only to find they forgot they had temporarily stacked lawn furniture,
bags of leaves and lawn clippings, around their unit over the
winter.)
- Some people intentionally cover their condenser to protect
it from the elements during the winter, although these units
require no protection since they are designed for outdoor installation.
- Run your air conditioner for a few minutes in late spring
or early summer, before you need it. If you wait until the first
hot day to discover it isn't working, you'll find yourself on
a waiting list, sweltering for days before an air conditioning
specialist can come to fix it.
- Change the filters regularly. Dirty filters restrict air
flow, reduce efficiency and worse case, can cause the evaporator
to ice up. Disposable fiberglass filters should be replaced.
Electrostatic or electronic filters need to be washed regularly.
- Be sure all access panels are secure, with all the screws
in place. Clean obvious obstructions such as newspaper
and leaves from around the exterior of the unit.
- Be sure the thermostat is set in the cooling mode. Just setting
the dial below room temperature will not activate the air conditioning
if it is set in the heat mode.
- A thoroughly cleaned air conditioning unit will operate at
top efficiency. However, homeowners are strongly discouraged
from using a hose and water to try to clean it themselves because
of the very serious risk of electrical shock and possible shorting
of electrical components.
I will also outline the steps of a professional furnace check-up.
- Inspect thermostat for proper operation.
- Inspect filter, and change or clean as needed.
- Check all electrical components and controls.
- Oil motors as needed.
- Inspect heat exchanger for possible cracks. A crack in the
heat exchanger will introduce carbon monoxide into the living
space.
- Check air flow. If diminished, it may be necessary to clean
the evaporator coil.
- Check air fuel mixture, where appropriate.
To locate a reliable Heating & Air specialist to service
your air conditioning unit, please visit our site at: http://www.servicemagic.com,
and let us match you with the ideal service professional in your
area.
Good luck!
This information is brought to you by Thomas Fishler of
Thomas Fishler's Heat & Air Conditioning & Duct Cleaning
in Carmichael, California.
Kathy Maynard
-- Tips courtesy of Service Magic